|
Direct Indent from the Manufacturer
Sheet, Coil Strip & Circles
The most efficient way to purchase Flat Rolled Brass is direct from the manufacturer in the exact size & specification that you require. There are certain minimum criteria that must be met in order to buy this way, but the savings can be considerable.
Minimum Order Quantity : This will vary depending on your exact requirements, but in most cases the mills will accept a minimum of 1000 kgs per individual item.
Thickness Range : Currently we can buy Flat Rolled Brass products between
0.13mm - 3.00mm thick. Depending on their capabilities, the mill may impose some restrictions on the width to thickness ratio available.
Available Widths : The coil widths available range from 10mm - 1000mm wide depending on thickness. However, the mill may require a higher minimum quantity for widths that may leave them with excessive waste after slitting from standard 1000mm wide coils.
Available Tempers : Our suppliers offer the normal range of tempers :-
| Soft |
1/8 Hard |
¼ Hard |
½ Hard |
| ¾ Hard |
Hard |
Extra Hard |
Spring Temper |
Standards : Our suppliers manufacture to most major international standards. If you have specific requirements outside of those standards, we can enquire with the manufacturer on your behalf.
Lead Time : Most items will arrive in New Zealand approximately 4 months from time of order.
|
